CPE series-Casting PE/PP Embossed Film Making Machine
| MODEL NO | CPE 100T1300 | CPE 120T2500 | |
| PRODUCTION | PE EMBOSSING FILM | PE EMBOSSING FILM | |
| MAX. WIDTH | 1200m/m | 2000m/m | |
| FILM THICK | 0.03~0.25m/m | 0.03~0.25m/m | |
| MAX.OUTPUT/hr | 120~180kg | 180~240kg | |
| INSTALLED POWER | 166KW | 210KW | |
| ESTIMATED RUNNING CONSUMPTION |
116KW | 150KW | |
| EXTRUDER | TYPE | NON-VENTED TYPE HIGH BASEMENT EXTRUDER | |
| SCREW DIA | 100m/mØ | 120m/mØ | |
| L/D | 30/1 | 30/1 | |
| SCREW SPEED | 0~100 r.p.m | 0~100 r.p.m | |
| MATERIAL OF SCREW | SCM-440 alloy steel with nitrided,hard-chromed treatmentS | ||
| MATERIAL OF BARREL | SACM-645 alloy steel with polished, nitrided | ||
| HEATING CAPACITY | 35.2KW | 54KW | |
| TEMPERATURE CONTROL | 5 | 6 | |
| BARREL COOLING | 1/8HP Blower×5 | 1/8HP Blower×6 | |
| MAIN DRIVING MOTOR | MOTOR DC | 100HP | 150HP |
| SCREEN CHANGER | TYPE | HYDRAULIC OPERATING SYSTEM, SLIDING PLATE TYPE | |
| HYDRAULIC PACK | 3HP | 3HP | |
| T-DIE | DIE WIDTH | 1300m/m | 2150m/m |
| DIE LIP | 0.8m/m | 0.8m/m | |
| TEMPERATURE CONTROL | 7 | 11 | |
| HEATING CAPACITY | 28KW | 41.8KW | |
| ROLL STACK | TYPE | 3 ROLLERS IN HORIZONTAL POSITION | |
| CHILL ROLLER | 300m/mØ×1500m/m×1 | 350m/mØ×2500m/m×1 | |
| SILICON ROLLER | 200m/mØ×1500m/m×1 | 300m/mØ×2500m/m×1 | |
| EMBOSSING ROLLER | 450m/mØ×1500m/m×1 | 450m/mØ×1500m/m×1 | |
| TAKE-UP ROLLER | 160m/mØ×1500m/m×2 | 200m/mØ×1500m/m×2 | |
| EXPANSION ROLLER | 125Ø×1500m/m | 125Ø×2500m/m | |
| TENSION CONTROLLER | JAPAN MADE,TC40×1 SET | ||
| SLITTING&EDGE TRIMMING DEVICE |
IN-LINE OPERATION SYSTEM | ||
| TENSION WINDER | TYPE | Turret tumbling tension controlled winder,film cut-off by hot wire at pre-set target film length and Reel-Change automatically | |
| DRIVEN MOTOR(WINDING) | 2HP DC with 1/20 reducer×2 sets |
3HP DC with 1/20 reducer×2 sets |
|
| SPEED(M/min) | D-60M | ||
| EDGE SCRAP RECYCLING UNIT |
TYPE & OPERATION MEIHOD |
Spooled winder unit×2 sets trimmed scrap being compressed,crushed and fed into extruder by 3HP centrifugal blower for reclamation | |
| WATER CHILLER |
POWER | 3.75KW×2 | 5KW×2 |
| PIPE SIZE | 1 1/2" | 1 1/2" | |
| BTU | 119400(10RT) | 176925(15RT) | |
| CONTROL PANEL | TYPE | Isolated type with complete instrumentation and wiring | |
| OPTIONAL ITEMS | 1HP Auto Loader 3HP Air compressor |
||